OBSOLETE Patch-ID# 147161-06
Download this patch from My Oracle Support
Your use of the firmware, software and any other materials contained
in this update is subject to My Oracle Support Terms of Use, which
may be viewed at My Oracle Support.
|
For further information on patching best practices and resources, please
see the following links:
|
Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
|
Keywords: bge
Synopsis: Obsoleted by: 147147-26 SunOS 5.10: bge patch
Date: Nov/08/2012
Install Requirements: Reboot after installing this patch to activate the changes delivered. An alternative may be specified in the Special Install Instructions.
Solaris Release: 10
SunOS Release: 5.10
Unbundled Product:
Unbundled Release:
Xref: This patch available for x86 as patch 147162
Topic: SunOS 5.10: bge patch
***********************************************************
NOTE: This patch may contain one or more OEM-specific platform ports.
See the appropriate OEM_NOTES file within the patch for
information specific to these platforms.
DO NOT INSTALL this patch on an OEM system if a corresponding
OEM_NOTES file is not present (or is present, but instructs not
to install the patch), unless the OEM vendor directs otherwise.
***********************************************************
Relevant Architectures: sparc sparc.sun4u sparc.sun4v
Bugs fixed with this patch:
Changes incorporated in this version: 7174195
Patches accumulated and obsoleted by this patch:
Patches which conflict with this patch:
Patches required with this patch: 118833-36 120011-14 127127-11 139555-08 141444-09 142909-17 144500-19 (or greater)
Obsoleted by: 147147-26
Files included with this patch:
/etc/driver_aliases
/platform/sun4u/kernel/drv/sparcv9/bge
/platform/sun4v/kernel/drv/sparcv9/bge
Problem Description:
7174195 after unplugging the cable, the link is still reported up and LEDs are not set correctly
(from 147161-05)
7171015 no link up/down message is output when plugging/unplugging network cable after 147161-02
(from 147161-04)
7087515 M3000 with bge chip type 5718 panics when dladm and kstat -p commands are issued simultaneously
7130965 panic with bge + kstat
(from 147161-03)
7089698 using ndd -get for bge no longer works correctly after applying 144500-19
7115396 unused bge interface logs "link: unknown" when dladm show-link is called
(from 147161-02)
7022270 add device support for Broadcom 5720
(from 147161-01)
7023313 dladm show-link delay in open unplumbed bge instances
Patch Installation Instructions:
--------------------------------
Please refer to the man pages for instructions on using 'patchadd'
and 'patchrm' commands provided with Solaris.
The following example installs a patch to a standalone machine:
example# patchadd /var/spool/patch/123456-07
The following example removes a patch from a standalone system:
example# patchrm 123456-07
For additional examples please see the appropriate man pages. Any
other special or non-generic installation instructions should be
described below as special instructions.
Special Install Instructions:
-----------------------------
None.
README -- Last modified date: Sunday, February 10, 2013